Foil Drive V2 Motor Puck

The Foil Drive v2 Motor Puck features a re-designed shape specific for use with the v2 Motors and their Removeable V2 When installing the puck, the cable must first be plugged into the Motor, then the Puck is installed over the top of the cable with the cut-out slot aligning with that on the motor cable. 

Provided hardware (4x M4 16mm Bolts) then lock the system in place. 

Note: The v2 Motor Puck is ONLY compatible with v2 motors for Gen2 systems. The v2 Puck utilizes slightly shorter installation hardware than the original v1 Pucks. 

Please follow the instructional video to correctly replace the puck.